单项选择题
You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).
Server1 experiences a power failure and shuts down unexpectedly. You start the server and receive the following error message; “NTLDR is missing. Press Ctrl+Alt+Del to restart.”
You need to ensure that you can run Windows Server 2003 on Server1.
What should you do first? （）
A. Start Server1 and press F8.
B. Start Server1 by using the Windows Server 2003 SP2 installation media and access the Recovery Console.
C. Create a MS-DOS startup disk. Start Server1 from the MS-DOS startup disk.
D. Create an Automated System Recovery (ASR) floppy disk from a different Windows Server 2003 SP2 server. Start Server1 from the ASR floppy disk.
相关考题
-
单项选择题
Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 is configured as shown in the following table. Disk1 fails. You remove Disk1 from the computer and install Disk4. You open the Disk Management snap-in and discover that the status of Disk1 is Missing. You bring Disk4 online as a dynamic disk. Disk4 has no volume on it. You need to add Disk4 to the RAID-5 volume for drive C. What should you do from the Disk Management snap-in? （）
A. From the Action menu, select Rescan disks.
B. Right-click on Disk4 and create a spanned volume.
C. Right-click on Disk2 and then click Repair Volume.
D. Right-click on Disk1 and then click Reactivate Disk. -
单项选择题
Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 is configured as shown in the following table. Disk1 fails. You remove Disk1 from the computer and replace it with a 250-GB basic disk named Disk2. You open the Disk Management snap-in and remove Disk1 from the mirrored volume. You are unable to add Disk2 to the mirrored volume. You need to ensure that you can add Disk2 to the mirrored volume for drive C. What should you do? （）
A. Convert Disk2 to a dynamic disk.
B. On Disk2, create a 160-GB simple volume.
C. From the Action menu, select Rescan disks.
D. Replace Disk2 with another disk that is the same size as Disks. -
单项选择题
Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 is configured as shown in the following table. Disk2 fails. You remove Disk2 from the computer and replace it with a new disk. You open the Disk Management snap-in and discover that the status of a disk is Missing. You initialize the new disk and convert it to a dynamic disk. You need to configure Server1 to meet the following requirements: ·Prevent the loss of data on drive E. ·Allow the new disk to be added to the mirror of drive E. ·Allow the missing disk to be removed from the Disk Management snap-in. What should you do? （）
A. Break the mirror.
B. Remove the mirror.
C. Remove the volume.
D. Create a simple volume.
